O-rings norelem FR
By A Mystery Man Writer
Description
O-rings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. O-rings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the cross-section. During operation, the median pressure increases the deformation of the O-ring and so increases the sealing effectiveness. For best sealing effectiveness, the O-ring should have the largest possible cross-section. During installation the correct groove size, compaction, elongation/compression should be ensured. By static use the compaction should be 15 - 30% of the cross-section. By dynamic use it should be 10 - 18% (hydraulic), 4 - 12% (pneumatic). With regard to the ID, when installed the O-ring should be stretched max 6% compressed max 3% The material NBR has a high wear resistance and is resistant to mineral oil based lubricating oils and grease, hydraulic oils (H, H-L, H-LP), high-flashpoint pressure fluids (HFA, HFB, HFC), aliphatic hydrocarbons, silicon oil and grease, water up to ca. 80° C
Élingue d'arrimage FTC O'Ring 2
O RING 2 Élingues - FTC TREE
Support With Flattened Oscillating Ball And Internal Hexagon
Recessed hinges - Industrie online
Ball lock pins with high shear strength
Ring D=28 Ref. Norelem 03199-28
Joint torique NBR 106 x 3 - Shore 70, joint torique nbr
Nbr O-ring D1= 30 D2= 3.5 Ral 3003 A= 350 D= M08 Ref. Norelem 23900
Nbr O-ring D1= 30 D2= 3.5 Ral 3003 A= 350 D= M08 Ref. Norelem 23900
ORFS-O rings, ORFS
Maschinenteil24, Norelem Spring bar coupling Gr. 30 Niro
DYNALINE O-RING KIT, HIGH TEMP, -25 ° C TO 200 ° C, RED, VITON
from
per adult (price varies by group size)